ELECTRONIC & ENGINEERING CO. (I) P. LTD.
08
Jun
Share
No Comments on Hardness Testing of CV-Joints and Tulips EECI Blogs
Hardness Testing of CV-Joints and Tulips
Hardness testing of the shaft of CV-joints is necessary, as they belong to the safety-relevant components. Lack of quality of the shaft‘s material can lead to breakage and thus failure of the drive train. The fixed outer races and tulips are also checked for quality purposes after hardening. Testing can be done using the non-destructive[…]
Read More01
Jun
Share
No Comments on SENTINEL 880 – Delta Gamma-Ray Projectors EECI Blogs
SENTINEL 880 – Delta Gamma-Ray Projectors
QSA Global, USA have been offering the SENTINEL 880 Delta Gamma-Ray Source Projectors for the past two decades. These projectors have proven durability and reliability to clients all across the world. They have an unparalleled safety record in varying environmental conditions such as snow, high humidity & hot deserts. They are extremely simple to operate, which ensures minimum[…]
Read More25
May
Share
No Comments on Automated 100% Crack & Heat Treatment Testing of Gear Shafts EECI Blogs
Automated 100% Crack & Heat Treatment Testing of Gear Shafts
The gear shaft is a central component of the transmission. The constant load changes stress the component to a high degree, which is why perfect material is necessary. Foerster assists in quality assurance with non-destructive testing systems, that use the eddy current method to check the gear shafts for material defects such as cracks, as well[…]
Read More18
May
Share
No Comments on DOSE & DOSE RATE SURVEY METER – DSM – 10I EECI Blogs
DOSE & DOSE RATE SURVEY METER – DSM – 10I
EECI is offering free RADMAN SOFTWARE with EECIRAD DSM10I, DOSE & DOSE RATE SURVEY METER. Features: Portable & versatile survey meter capable of detecting X-Rays & Gamma Rays Advanced algorithm to measure accurate dose and dose rates Can measure dose rates up to 10 R/h & an accumulated dose of 1000 R Can measure in Roentgen, Sievert, CPM, CPS &[…]
Read More11
May
Share
No Comments on EECIFLUX YOKES EF-1Y EECI Blogs
EECIFLUX YOKES EF-1Y
One-Person Package The EF-1Y is a complete magnetic package. One person takes it to work and easily performs a thorough and reliable inspection in a fraction of the time consumed by large bulky equipment. Precise Area Inspection Powerful magnetic fields are concentrated and applied to the precise area to be inspected. The construction of the EF-1Y allows for the[…]
Read More05
May
Share
No Comments on SAMPLE TESTS USING SOFT ULTRASONIC TRANSDUCERS BY JP PROBE EECI Blogs
SAMPLE TESTS USING SOFT ULTRASONIC TRANSDUCERS BY JP PROBE
Japan probe is celebrating it’s 43rd year as a manufacturer of ultrasonic transducers and inspection systems in Japan, and is pleased to announce sample inspection in India through it’s distributor Electronic & Engineering Co (I) Pvt Ltd, (EECI). EECI’s branches cover 10 major cities in India, with which, Japan Probe will be able to support and uphold[…]
Read More06
Apr
Share
No Comments on TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414 EECI Blogs
TESTING OF ALUMINIUM CASTINGS WITH ADVANCED ULTRASONIC FLAW DETECTOR – AS414
Non-destructive testing using ultrasonic measurement is used to ensure the quality of Aluminium-casting products. The quality of a casting depends on the presence of discontinuities such as porosity and on the final metallurgical structure. Discontinuities occurring in the sub-surface of the cast structure mostly have irregular surfaces which scatter the ultrasound waves and make ultrasonic testing[…]
Read More23
Mar
Share
No Comments on AREA GAMMA MONITOR AGM-1 EECI Blogs
AREA GAMMA MONITOR AGM-1
Area Gamma Monitor AGM-1, manufactured & supplied by Electronic & Engineering Co (I) Pvt Ltd (EECI) is primarily designed to indicate dose rates in the measuring unit selected & produces audio/visual alarms, if the dose rate exceeds preset value. By default, the unit is set to be in mR/hr & the range is (0.01 – 999.9mR/hr). Use of these devices[...]
Read More09
Mar
Share
No Comments on QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS EECI Blogs
QUALIFICATION OF COPPER ALLOYS FOR PRODUCTION OF ELECTRIC COMPONENTS
Industry : Metal manufacturingMaterial/Part type : Non-magnetic materialsMeasuring parameter : PermeabilityIndustry standard : IEC 60404-15, ASTM A342MFOERSTER device : MAGNETOSCOP with Permeability Special alloys of copper are valuable for their good electrical conductivity and optimal results for processing. Some special alloys possess extreme non-magnetic properties, that are additionally useful for magnetic sensitive applications. To adhere[...]
Read More03
Mar
Share
No Comments on Bond Testing between FRP and Rubber in Power Grid Insulators EECI Blogs
Bond Testing between FRP and Rubber in Power Grid Insulators
In power grid insulators, fibre-reinforced plastic/polymers (FRP) and rubberised materials are fused together. If the interface bonding is not uniform, the distribution of the electric field will be adversely affected, which accelerates the ageing of composite insulators and thus, affects the safe operation of transmission lines. Hence, it is important to inspect the bonding between the FRP[…]
Read More