ELECTRONIC & ENGINEERING CO. (I) P. LTD.
27
Jul
Share
No Comments on SIGMATEST 2.070 – Accurate and reliable conductivity measurement EECI Blogs
SIGMATEST 2.070 – Accurate and reliable conductivity measurement
The SIGMATEST 2.070 from Institut Dr. Foerster GmbH & Co. KG (Germany), is a portable eddy current instrument which measures the electrical conductivity of non-ferromagnetic metals based on the complex impedance of the measuring probe. The measuring range for the instrument is established by calibration. When unknown test pieces are measured, the instrument converts the complex impedance value to an[…]
Read More20
Jul
Share
No Comments on GSM-5 – Compact Gamma Dose Rate & Dose Meter EECI Blogs
GSM-5 – Compact Gamma Dose Rate & Dose Meter
The GSM-5 is a Digital Compact Dose Rate and Dose Meter designed for a wide range of applications involving a possibility for abnormal radiation levels. Compact, lightweight, waterproof, its performance and its friendly user interface make the GSM-5 perfectly suited to radiation survey in field conditions, in nuclear industry and for protection against radiological hazards[…]
Read More06
Jul
Share
No Comments on MAGNETIC PARTICLE INSPECTION FOR CASTING EECI Blogs
MAGNETIC PARTICLE INSPECTION FOR CASTING
Magnetic Particle Inspection (MPI) is an effective process for discovering flaws in investment castings. This method is best for detecting cracks and flaws on the surface and just below. It can be used on all alloys that can be strongly magnetized including irons and ferritic steels. Austenitic steels are typically not good candidates. After a[…]
Read More29
Jun
Share
No Comments on Calibration Services For Radiation Detection & Monitoring Devices EECI Blogs
Calibration Services For Radiation Detection & Monitoring Devices
EECI‘s calibration lab for Radiation Detection and Measuring Equipments which is approved by Atomic Energy Regulatory Board (Department of Atomic Energy, India) vide approval No.17-CALOL-213161 dated 07.09.2017 & accredited by National Accreditation Board For Testing and Calibration Laboratories (#NABL) vide Certification No. CC-3032 dated 14.08.2019. We offer services to calibrate & certify Radiation Detection & Measuring Equipments. Our calibration lab has[…]
Read More22
Jun
Share
No Comments on EECIFLUX PERMANENT YOKES – PY-1 AND PY-2 EECI Blogs
EECIFLUX PERMANENT YOKES – PY-1 AND PY-2
The EECIFLUX PY-1 and PY-2 permanent magnetic yoke are rugged high performance yokes, designed for magnetic particle inspection. EECIFLUX permanent magnetic yokes are designed with a flexible coated steel cable that allows a maximum pole distance of 250 mm. The permanent magnets are protected by a durable housing. Defect location: Subsurface and surface Ideal For: Field Testing Spot[…]
Read More15
Jun
Share
No Comments on HARDNESS TESTING WITH SONODUR 3
CALL FOR FREE APPLICATION TRIALS & DEMONSTRATIONS
EECI Blogs
HARDNESS TESTING WITH SONODUR 3<br>CALL FOR FREE APPLICATION TRIALS & DEMONSTRATIONS
The Sonodur 3 from Institut Dr. Foerster GmbH & Co. KG (Germany), provides a unique solution for hardness testing using both UCI (Ultrasonic Contact Impedance) & Leeb methods. The portable & rugged Sonodur 3 provides a reliable hardness testing solution for industries such as automotive, aerospace, heavy engineering, energy & power sector, tools, molds, steel, casting, material treatment, medical, naval[…]
Read More08
Jun
Share
No Comments on Hardness Testing of CV-Joints and Tulips EECI Blogs
Hardness Testing of CV-Joints and Tulips
Hardness testing of the shaft of CV-joints is necessary, as they belong to the safety-relevant components. Lack of quality of the shaft‘s material can lead to breakage and thus failure of the drive train. The fixed outer races and tulips are also checked for quality purposes after hardening. Testing can be done using the non-destructive[…]
Read More01
Jun
Share
No Comments on SENTINEL 880 – Delta Gamma-Ray Projectors EECI Blogs
SENTINEL 880 – Delta Gamma-Ray Projectors
QSA Global, USA have been offering the SENTINEL 880 Delta Gamma-Ray Source Projectors for the past two decades. These projectors have proven durability and reliability to clients all across the world. They have an unparalleled safety record in varying environmental conditions such as snow, high humidity & hot deserts. They are extremely simple to operate, which ensures minimum[…]
Read More25
May
Share
No Comments on Automated 100% Crack & Heat Treatment Testing of Gear Shafts EECI Blogs
Automated 100% Crack & Heat Treatment Testing of Gear Shafts
The gear shaft is a central component of the transmission. The constant load changes stress the component to a high degree, which is why perfect material is necessary. Foerster assists in quality assurance with non-destructive testing systems, that use the eddy current method to check the gear shafts for material defects such as cracks, as well[…]
Read More18
May
Share
No Comments on DOSE & DOSE RATE SURVEY METER – DSM – 10I EECI Blogs
DOSE & DOSE RATE SURVEY METER – DSM – 10I
EECI is offering free RADMAN SOFTWARE with EECIRAD DSM10I, DOSE & DOSE RATE SURVEY METER. Features: Portable & versatile survey meter capable of detecting X-Rays & Gamma Rays Advanced algorithm to measure accurate dose and dose rates Can measure dose rates up to 10 R/h & an accumulated dose of 1000 R Can measure in Roentgen, Sievert, CPM, CPS &[…]
Read More