|
Laboratory Finishing Machine
|
|
Horizontal
Padding Mangle
|
-
No separate trough for padding liquor.
-
The space formed between 2 bowls, when under pneumatic pressure
acts as a trough.
-
Minimum quantity of liquor required for padding a sample.
-
Simple operations. Maximum working width is 300mm.
-
Minimum time is required for padding sample.
-
No time lag between dip & nip as the sample gets squeezed
immediately after passing through padding liquor.
-
No exposure to atmospheric conditions after padding and before
getting squeezed.
-
Substantial saving in liquor consumption thus saving on consumption
of soft water, dyes, auxiliaries & chemicals.
Hence very economical model.
-
A trough is provided below the bowls to collect liquor
after padding.
|
|
|
Laboratory
Padding Mangle (Vertical)
|
-
Versatile machine, can be used for dyeing, printing and
finishing trials.
-
Working width: 450 mm.
-
Automation through Microprocessor Controller.
-
For even pressure throughout, pneumatic loading of the bowl.
-
Small unheated trough provided for padding a small size
samples.
-
Nip padding trough and doctor blades available as standard
accessories.
-
Compensator for use in conjunction with Drying Curing and
Setting Chamber available as option.
-
3 bowl padding mangle with central bowl of ebonite or
stainless steel can also be offered.
|
|
|
Laboratory
Padding Mangle (Universal)
|
-
Universal padder is help to dyer get a result in Vertical
also Horizontal (without dead weight) on single machine.
-
Working width – 450 mm.
-
It will help to reduce the cost and space on modern laboratory,
where it is required to do both type of padding mangle i.e.
Vertical and Horizontal.
-
Temperature control through the Microcontroller: MC-6.
-
Material construction: SS 304 and SS 316.
-
For even pressure throughout, pneumatic loading of the bowl.
-
Synthetic rubber coating on bowl.
-
Small unheated trough provided for small size samples.
-
Minimum time is required for padding sample.
-
No time gap between dip & nip as the samples get squeezed
immediately after passing through padding liquor (Horizontal).
-
Rubber hardness: 65? / 70? shore hardness.
-
Versatile machine, can be used for application in dyeing,
printing and finishing trials.
|
|
|
Laboratory
Steamer
|
-
Laboratory Steamer for fixation of prints under high
temperature high pressure conditions.
-
Ideal for saturated steaming upto temperature of 130°C.
-
Samples are hooked on star frame and placed in an inner chamber.
-
Maximum sample size: 200 mm x 2 meters.
-
Electrical heating for steam generation.
-
Nozzle provided for external steam supply.
-
Facility for steam superheating at atmospheric pressure
available.
|
|
|
High
Temperature Steamer: HT-U
|
-
High Temperature Steamer is a versatile machine useful for
applications like saturated steaming, high temperature steaming,
flash ageing and thermosoling at atmospheric pressure.
-
Maximum sample size: 45 cm. x 30 cm.
-
Automatic pin frame transfer with pre selectable dwell time.
-
Electrical heating for steam generation provided.
-
Steam super heating upto 250°C possible.
-
For uniform distribution of steam or dry heat in the machine,
blower is provided.
-
Nozzle provided for external steam supply.
|
|
|
Drying,
Curing & Setting Chamber (Stenter)
|
-
For drying, curing and thermofixation of samples.
-
Working width: 450 mm.
-
Speed control for variable dwell time of 30 seconds to 5 minutes.
-
Electrical heating for temperature upto 250°C.
-
Heating zone length: 1700 mm.
-
Adjustable air flow to avoid migration.
-
Can be used either for small sizes of samples or for
continuous fabric length.
-
Can be synchronised with Laboratory Vertical Padding Mangle
for continuous padding, drying and curing / setting process.
|
|
